Cardinal Valves
Heavy Duty Transformer Oil Valves
Transformer oil valves ranging from 2" to 8" in size including ANSI standard and OEM-specific flange configuration bolt hole patterns. Our valves are designed for use on new transformers or as replacements on existing electrical transformers.
Features and Options:
- Cardinal valves are robust in design so that over tightening or minor abuse encountered in handling, or during factory/field installation will not result in malfunctioning of the valve
- All parts are made from non-corrosive or suitably protected material to withstand outdoor exposure on external surfaces and hot transformer oil on internal surfaces
- Fasteners are designed to prevent loosening under normal operating conditions
- In the open position, the valve flapper will not vibrate or flutter when valve is installed close to the suction side of the pump, flapper acts as a fluid straightener, thus enhancing the pump's performance
- Valve design temperatures are –40°C (–40°F) to 100°C (212°F)
- Operating handle displays the valve's open and shut position and is designed so it can be manually locked in either position
- Valves are individually coated with oil and sealed to protect from contaminants
Related Products
Contact Us
Wabtec Heat Transfer & Energy Solutions
SALES & SUPPORT
For the fastest response time, please fill out the contact form.
If you prefer to contact us directly:
(519) 451-0310
unifin [at] wabtec [dot] com